The AW-D135C Conventional Manual Call Point from Asenware is designed for the manual activation of a fire alarm system, allowing occupants to send an alarm signal directly to the fire alarm control panel when a fire or emergency condition is discovered. This helps provide rapid notification and supports timely evacuation and emergency response procedures.
The manual call point operates at 16–24V DC, with low power consumption of ≤20µA in monitoring mode and ≤15mA in alarm condition. It features a durable red ABS housing and a compact design measuring 87 × 87 × 51.2 mm. The device is intended for indoor applications and complies with the EN54-11 standard.
The AW-D135C can be integrated with Asenware conventional fire alarm systems, including the AW-CFP2166 Conventional Fire Alarm Control Panel. It is suitable for installation in corridors, emergency exits, and access points within commercial and administrative buildings, hotels, schools, public facilities, and various other projects.
The AW-D135C Conventional Manual Call Point from Asenware is designed to provide a reliable and straightforward method for manually activating a conventional fire alarm system. It allows building occupants to initiate a fire alarm immediately after discovering a fire or emergency condition, helping ensure rapid notification and supporting timely evacuation and emergency response procedures.
When the manual call point is activated, it sends an alarm signal through the conventional detection circuit to the connected fire alarm control panel. The panel can then identify the corresponding alarm zone and activate the appropriate notification devices, such as horns, sounders, and horn strobes, according to the system configuration.
The AW-D135C operates within a 16–24V DC voltage range, making it suitable for integration with compatible conventional fire alarm systems. Its low electrical consumption supports efficient system operation, with a monitoring current of ≤20µA and an alarm current of ≤15mA.
Designed for indoor applications, the AW-D135C can be installed in clearly visible and easily accessible locations throughout a building. Typical installation points include corridors, escape routes, entrances, stairways, and areas near emergency exits, allowing occupants to activate the fire alarm quickly when necessary.
The device features a durable red ABS housing, providing a recognizable appearance suitable for fire alarm applications. Its compact dimensions of 87 × 87 × 51.2 mm allow it to be integrated neatly into different building environments while remaining clearly identifiable as a manual fire alarm activation point.
The AW-D135C is designed to operate in temperatures ranging from -10°C to +55°C and in environments with relative humidity of up to 95%, supporting reliable operation across a variety of indoor conditions.
The manual call point complies with the EN54-11 standard for manual call points used in fire detection and fire alarm systems. This makes it suitable for conventional fire alarm installations where compliance with the applicable system requirements is required.
The AW-D135C can be integrated with other Asenware conventional fire alarm products, including the AW-CFP2166 Conventional Fire Alarm Control Panel, AW-CSD381 Conventional Photoelectric Smoke Detector, and AW-CSS2166-2 Horn Strobe, helping create a coordinated solution for automatic detection, manual alarm activation, system control, and occupant notification.
It is suitable for a wide range of applications, including commercial and administrative buildings, offices, hotels, schools, residential buildings, public facilities, and other small to medium-sized projects using conventional fire alarm systems.
With its simple manual activation, low power consumption, compact ABS construction, and compatibility with conventional fire alarm systems, the AW-D135C provides a practical solution for adding manual fire alarm activation points throughout a protected building.
Nile Shield is ready to help you choose the right system and protect your facility to certified codes.
